Craft Ideas, Garden Crafts · Easy · 25 minutes

DIY PVC Pipe Garden Netting Clips for Hoop Supports

Make your own DIY PVC pipe garden netting clips to keep your garden hoops and netting securely in place. This easy garden hack helps protect your plants from pests and wind.

PVC pipe clips securing netting over garden hoop supports on a raised bed
Difficulty
Easy
Time
25 minutes

Materials

  • PVC pipe
  • Hand saw
  • Measuring tape
  • Sandpaper
  • Garden netting
  • Raised bed with hoop supports
Step-by-step illustration of making PVC pipe clips for garden netting on hoop supports.
Click the illustration to open the printable PDF in a new tab.

Download the printable PDF

How to make it

  1. Measure and mark the PVC pipe for cutting.
  2. Secure the pipe and cut it into short sections using a hand saw.
  3. Smooth the edges of each cut section with sandpaper.
  4. Cut a slit lengthwise in each PVC section to create a clip.
  5. Snap the clip over the hoop support and secure the garden netting underneath.
  6. Repeat for all hoop supports to hold the netting in place.

DIY pvc pipe garden clips are a clever way to keep netting attached to hoop supports in your raised garden bed. They help protect your leafy greens and other vegetables from pests and wind.nThese clips are easy to spot and adjust, making it simple to lift the netting for harvesting or maintenance. Their sturdy design ensures the netting stays in place even during breezy days.nAlways check the edges of the PVC pipe for rough spots and sand them smooth to avoid damaging your netting or injuring your hands when installing or removing the clips.

More craft ideas

Scroll to Top